Go Back   Maxum Boat Owners Club - Forum > Maxum General > Maxum Maintenance
Click Here to Login
Register FAQ Community Calendar Today's Posts Log in

Reply
 
Thread Tools Search this Thread Display Modes
 
Old 03-23-2014, 03:24 PM   #1
Lt. Commander

 
Join Date: Feb 2010
Location: Half Moon Bay, CA
Posts: 172
Default source for wiper arm?

I replaced the wiper blades on my Maxum 2600SE, and the wiper arm that holds the blade is corroded and it bent when I tried to put the new blade on.

I went to the local auto parts store, and they don't have a replacement. Does anyone know where I can get something like this?

Click image for larger version

Name:	wiper arm.JPG
Views:	11
Size:	560.0 KB
ID:	3214
__________________

__________________
2006 Maxum 2600SE with Mercruiser 5.0L MPI and BIII Drive
iceman is offline   Reply With Quote
Old 03-23-2014, 04:16 PM   #2
Admiral
 
biggerseagar's Avatar
 
Join Date: Dec 2010
Location: central Illinois
Posts: 2,284
Default

Iceman............try google on this. There are different arms and they have special names for these. Just type in windshield wiper arms.

You might give a call to your nearest marine dealer if you have no luck. I had to replace mine on my 3000 and found it on line.

Good Luck

Roger
__________________

biggerseagar is offline   Reply With Quote
Old 03-23-2014, 05:09 PM   #3
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,221
Default

+1 what Roger said. On line, West Marine, ... Although you will probably only find the entire arm, from mount on motor to wiper and not just the pictured part.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 03-23-2014, 05:14 PM   #4
Lt. Commander

 
Join Date: Feb 2010
Location: Half Moon Bay, CA
Posts: 172
Default

Thanks Roger. I was able to find an online company called amequipment.com. It doesn't look like they sell just the part I need, I'd have to buy the whole arm, but if that's the case I'll do it.

Which brings me to my next quandary, how do I remove the entire arm? On a car there's usually a 13mm nut under some sort of cover, but it doesn't look like mine works that way. Here's a picture of that. I don't see any obvious way to remove it. I guess I can ask the company when I write them.

Tom

Click image for larger version

Name:	wiper arm mount.JPG
Views:	15
Size:	537.5 KB
ID:	3215


Mike: just saw your post, yes that's what I'm seeing.
__________________
2006 Maxum 2600SE with Mercruiser 5.0L MPI and BIII Drive
iceman is offline   Reply With Quote
Old 03-23-2014, 05:18 PM   #5
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,221
Default

Tom if you look/feel under it there should be a small spring clip that you need to pry away while pulling up. A mirror may need see this.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 03-23-2014, 05:24 PM   #6
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,221
Default

Or it may be like this one.

__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 03-23-2014, 05:26 PM   #7
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,221
Default

This is what I initally was talking about.

http://studeblogger.blogspot.com/201...placement.html
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 03-23-2014, 05:42 PM   #8
Lt. Commander

 
Join Date: Feb 2010
Location: Half Moon Bay, CA
Posts: 172
Default

OK great tip Mike, thanks! I'll go out and check to see if that's what I'm dealing with. I'm sure I have some sort of tool to pull it back.
__________________
2006 Maxum 2600SE with Mercruiser 5.0L MPI and BIII Drive
iceman is offline   Reply With Quote
Old 03-23-2014, 06:33 PM   #9
Admiral
 
biggerseagar's Avatar
 
Join Date: Dec 2010
Location: central Illinois
Posts: 2,284
Default

Glad it worked out...Iceman.

I do most of my reading on my tablet and don't get a chance on my big computer.....so looking all this stuff up ......well it is was it is.


Roger

Ps ...good job Mike!
biggerseagar is offline   Reply With Quote
Old 03-23-2014, 08:19 PM   #10
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,221
Default

Thanks Roger. I mainly use the PC but also my wife's iPad like now.

Glad to help all but rather be boating if the damn weather will break.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 03-23-2014, 08:40 PM   #11
Lt. Commander

 
Join Date: Feb 2010
Location: Half Moon Bay, CA
Posts: 172
Default

OK that was the trick, thanks guys. Got the wiper arm off, now I just need to find the right replacement.

I'd rather be boating also. We snuck in one trip back in Feb, but after that I had a punch list of 16 things to fix or address. I'm about halfway through the list, and well on my way with this one thanks to you guys!
__________________

__________________
2006 Maxum 2600SE with Mercruiser 5.0L MPI and BIII Drive
iceman is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 06:10 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.