The flushmount compass on my '91 2300 SCR needs to be replaced, but I can't remove it from the cockpit! I've taken out the three screws that appear to secure it, but it is still solidly attached! Any suggestions are welcome.
I only guessing that they used a sealant/adhesive as well as the screws.
If that is the case you just need to get a sealant de-bonder sold at all marine stores.
You won't need much.
__________________
__________________
Ken
1999 3788 Alrighty Then Port of Everett
2000 2100SCZ Maxum Lake Chelan alrightythen@iboatnw.com
Hope that’s it - I had to remove our pulpit on the Bay one time. Couldn’t believe how well the adhesive held. After removing the 6 bolts, railing and spraying the de-bonder, my admiral was still able to hang off the end while I kept prying it up.
Sorry no idea on the compass size?
__________________
Ken
1999 3788 Alrighty Then Port of Everett
2000 2100SCZ Maxum Lake Chelan alrightythen@iboatnw.com
Compass Removal
Linear Mode
