Reply
 
Thread Tools Search this Thread Display Modes
 
Old 05-21-2014, 11:22 AM   #1
Ensign
 
Join Date: May 2014
Posts: 10
Default 1994 3200 SCR Cockpit faucet

The faucet on the cockpit sink is missing. The water works, because when you turn it on it shoots straight up. Any clue how to access this system. There does not appear to be an access panel anywhere. Any help on how to repair would be appreciated.
Thanks
__________________

Oncman is offline   Reply With Quote
Old 05-21-2014, 11:37 AM   #2
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,176
Default

Seems to me someone talked about replace their faucet on a 3200 last year, try seaching old threads for this. I am sure someone with this model will chime in.

Good luck.
__________________

__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 05-21-2014, 11:49 AM   #3
Ensign
 
Join Date: May 2014
Posts: 10
Default

Thanks! I searched and did not see it...I'll try again
Oncman is offline   Reply With Quote
Old 05-21-2014, 11:58 AM   #4
Ensign
 
Join Date: May 2014
Posts: 10
Default

Faucet was removed by previous owner... Have no clue why or how to repair. Removed the 4 screws that hold it in place but there is not enough play in lines to lift it more then 1/4 inch off the counter so I can t see how to remove it. No apparent access underneath either.
Oncman is offline   Reply With Quote
Old 05-21-2014, 01:54 PM   #5
Moderator

 
shrew's Avatar
 
Join Date: Apr 2008
Posts: 5,588
Default

I would go into the engine compartment and see if you can get up there the forward-port side. The should be a huge space if in there. You could also look at removing the cabinet just below the sink. You could remove the sink itself, howver I believe you need to do that from underneath as well.
shrew is offline   Reply With Quote
Old 05-21-2014, 06:59 PM   #6
Captain
 
HavaMax's Avatar
 
Join Date: Jul 2009
Location: Lake Havasu City AZ
Posts: 832
Default

Oncman, do you have the ice maker option? I removed my ice maker and have full access to underside of sink.
__________________
Dezart Elegance Pool Tile Cleaning
1994 Maxum 3200 SCR
HavaMax is offline   Reply With Quote
Old 05-21-2014, 09:21 PM   #7
CGG
Lt. Commander
 
CGG's Avatar
 
Join Date: Jul 2013
Posts: 186
Default

I had to replace one last year on my 2000 3300SCR. I had to make my own access panel by cutting a hole in one of the storage bins to the right of it. I used a drill and moving it slowly make a square.
CGG is offline   Reply With Quote
Old 05-21-2014, 11:59 PM   #8
Admiral
 
Phillbo's Avatar
 
Join Date: Mar 2012
Location: Lake Powell
Posts: 1,613
Default

It's not a faucet, it's a bidet. It was an option that year
Phillbo is offline   Reply With Quote
Old 05-23-2014, 02:59 PM   #9
Lieutenant
 
Nehalennia's Avatar
 
Join Date: Jun 2009
Location: Marysville, WA
Posts: 62
Default

Take some pictures and post them.
__________________
Skål, Todd
~Nehalennia ∆~ Celtic Goddess of the Seafarers
2000 ~ SeaRay ~ 260DA, 5.7L EFI, Bravo III

www.vikingbay.co
Nehalennia is offline   Reply With Quote
Old 05-28-2014, 02:22 PM   #10
Ensign
 
Join Date: May 2014
Posts: 10
Default

Went into the engine compartment and disconnected the hot and cold lines at bottom, which gave me the room to pull the old faucet off. Thanks!!
Oncman is offline   Reply With Quote
Old 05-29-2014, 04:02 PM   #11
Moderator

 
shrew's Avatar
 
Join Date: Apr 2008
Posts: 5,588
Default

Nice!! I'm glad it worked out for you. It still amazed me how much space there is wasted in a boat. Not truly usable space but huge 'smugglers holds' of space all around. You can practically crawl into the space between the shell of the head and the hull, for example. Who'd guess you get to that space behind the head, by crawling through the aft cabin. LOL!!
__________________

shrew is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 09:21 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.