Reply
 
Thread Tools Search this Thread Display Modes
 
Old 07-31-2010, 03:10 PM   #1
Lt. JG
 
Join Date: Jul 2010
Posts: 20
Default Wiring radio to ACC switch

I have a 99 1800sr and am wanting to wire my radio to my empty acc switch rather than having it hot at all times. My question is routing the wires, my radio of course in on the port side and switches on starboard side. I can not find any wiring running down the port side to the battery so i dont know where it crosses at. I'm looking for advice whether to try to find the existing wiring for the radio or just cut and splice into the power/memory wires and route them however needed. Any advice would be great- Thanks in advance. Tim
__________________

timpyron1980 is offline   Reply With Quote
Old 08-29-2010, 03:22 PM   #2
Lt. JG
 
Hogger's Avatar
 
Join Date: Aug 2010
Location: Kennewick, WA
Posts: 29
Default

In my boat the wiring from the radio goes forward around the bow to get to the starboard side, and under the dash, next to the hull is a multi-pin plug that the wires connect to. Must be about 10 or 12 wires in the plug, some for the radio, some for the courtesy lights.
I'm going to upgrade my radio this week, and am going to re-wire it all.
Hogger is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 08:07 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2017, vBulletin Solutions, Inc.