Reply
 
Thread Tools Search this Thread Display Modes
 
Old 06-19-2014, 03:14 PM   #1
Lt. JG
 
Join Date: Jun 2014
Posts: 24
Default Transducer location...

Does anyone know where to locate the factory transducer for my 2002 MAXUM 2400 SCR. I have looked on the boat and can't seem to locate it??? What does it look like? Thanks!
__________________

nickgolf101 is offline   Reply With Quote
Old 06-19-2014, 03:25 PM   #2
Admiral
 
biggerseagar's Avatar
 
Join Date: Dec 2010
Location: central Illinois
Posts: 2,279
Default

Nick .......look in the engine compartment by the bilge pump. Should be a small black wire attached.

Other 2400 owners hopefully will chime in.

Roger
__________________

biggerseagar is offline   Reply With Quote
Old 06-19-2014, 05:18 PM   #3
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,175
Default

As Roger said it is in the engine compartment. It is a round puck bonded to the hull in front of the engine.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 04-28-2021, 01:10 AM   #4
Lt. JG
 
Join Date: Apr 2021
Posts: 27
Default sorry to resurrect an ancient thread but -

Quote:
Originally Posted by mmwjr View Post
As Roger said it is in the engine compartment. It is a round puck bonded to the hull in front of the engine.
Hi Guys, wondering if the transducer for my 1996 Maxum 2400 SCR will also be located in the engine room? I think I see something that looks like a transducer hanging off the transom but it almost looks like it's just hanging there by a black cable and not actually screwed down. Hard to see as the boat is in the water.
speedcat is offline   Reply With Quote
Old 04-28-2021, 01:20 AM   #5
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,175
Default

Quote:
Originally Posted by speedcat View Post
Hi Guys, wondering if the transducer for my 1996 Maxum 2400 SCR will also be located in the engine room? I think I see something that looks like a transducer hanging off the transom but it almost looks like it's just hanging there by a black cable and not actually screwed down. Hard to see as the boat is in the water.
I believe the factory install it’s transducers in the engine compartment, round puck but someone may have installed a replacement on the transom or it’s for an added electronic such as a gps/chart plotter.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 04-28-2021, 01:51 AM   #6
Lt. JG
 
Join Date: Apr 2021
Posts: 27
Default cored hull / in-hull transducer placement?

Thanks Mike!

Does anyone know if the 1996 Maxum 2400 SCR has a cored hull or can I basically install an in-hull transducer anywhere that will remain below waterline?

Thanks!
speedcat is offline   Reply With Quote
Old 04-28-2021, 01:55 AM   #7
Lt. JG
 
Join Date: Apr 2021
Posts: 27
Default

Additional question - I also seem to have a helm switch for "Depth Alarm," and one that I think says "Depth," but there is no depth meter or ability to set the depth of the alarm. There's a hole nearby where I assume this equipment once lived. Anyone know what the original equipment was, so I can try to find a replacement? Thanks!
speedcat is offline   Reply With Quote
Old 04-28-2021, 03:07 AM   #8
Captain
 
Join Date: Dec 2015
Location: Florida
Posts: 522
Default

Hulls are solid glass not cored.
Most transducers (if fitted) would be in the ER as Mike mentioned.
In dash readout was a some version of the Standard Horizon D41. Maxum used separate switches to control the head unit. You may be able to source a new/old stock unit to install in the dash and add a new transducer.

Given your dealing with a 1996, I’m guessing the prior owner had a failure with the factory unit and may have installed a separate unit with a transom mount transducer.
jparsons121 is offline   Reply With Quote
Old 04-28-2021, 11:47 AM   #9
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,175
Default

Quote:
Originally Posted by jparsons121 View Post
Hulls are solid glass not cored.
Most transducers (if fitted) would be in the ER as Mike mentioned.
In dash readout was a some version of the Standard Horizon D41. Maxum used separate switches to control the head unit. You may be able to source a new/old stock unit to install in the dash and add a new transducer.

Given your dealing with a 1996, I’m guessing the prior owner had a failure with the factory unit and may have installed a separate unit with a transom mount transducer.
Exactly! My 1997 2400 SCR has the in dash unit with the transducer mounted in the ER, it works but gets flaky (loses readings) at times.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 04-28-2021, 07:33 PM   #10
Lt. JG
 
Join Date: Apr 2021
Posts: 27
Default thanks so much

You guys are great!

The reason I'm asking is that I just bought this boat but pretty sure there is no depth on the old GPS unit mounted at helm. And I can't seem to get charts working there either. I'll need to get a charts/depth combo unit installed but worried about having to haul out to get the transducer installed. I don't have a trailer and haul-outs and shop schedules are super booked right now. Really want to get out on the water instead lol

Thus I am wondering if in-hull units actually work, and/or other methods I've read about:

Sternmate: FAQ Transducer questions, replies. concerns. Transom Transducer Mounting Comments-Questions & Help
Seasucker: https://www.seasucker.com/products/transducer-mount
Using Starboard?: https://www.thehulltruth.com/marine-...t-water-2.html

Thanks for any thoughts on this.
speedcat is offline   Reply With Quote
Old 04-30-2021, 01:17 AM   #11
Captain
 
Join Date: Dec 2015
Location: Florida
Posts: 522
Default

In hulls work fine as long as they are mounted firmly to the hull Where there are no viols in the material. I run an Airmar P79 for my legacy depth sounder mounted a few inches away from the factory unit in the ER.
jparsons121 is offline   Reply With Quote
Old 04-30-2021, 01:53 AM   #12
Lt. JG
 
Join Date: Apr 2021
Posts: 27
Default

Quote:
Originally Posted by jparsons121 View Post
In hulls work fine as long as they are mounted firmly to the hull Where there are no viols in the material. I run an Airmar P79 for my legacy depth sounder mounted a few inches away from the factory unit in the ER.
Thanks so much. What are viols?

I thought the Airmar equipment looked kinda spendy. I'm looking at a $119 in-hull unit from Garmin: https://buy.garmin.com/en-US/US/p/573584

They say it's compatible with the affordable chartplotter/fishfinder combo I'm looking at, with the right cables. Does anyone have experience with this in-hull Garmin transducer?
speedcat is offline   Reply With Quote
Old 04-30-2021, 10:27 AM   #13
Captain
 
Join Date: Dec 2015
Location: Florida
Posts: 522
Default

Missed the typo. Should read ‘voids’

WRT the Garmin transducer, it’s description says it’s for flat bottom hulls with a max dead rise angle of 6 degrees.
Not certain, but I think the 2400 has a dead rise of close to 20 degrees.
jparsons121 is offline   Reply With Quote
Old 04-30-2021, 12:18 PM   #14
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,175
Default

With any V hull the transducer if mounted flush will be at an angle which produces an error of the actual depth. The deeper the water the greater the error. You can add a wedge between the hull and transducer but must be of a material that won’t attenuate the beam and as already mentioned no voids in the bond lines between it and the hull and transducer.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 04-30-2021, 06:49 PM   #15
Lt. JG
 
Join Date: Apr 2021
Posts: 27
Default

Thanks all.

I am wondering if it will be possible to locate this in-hull transducer right in front of my motor, if there's a spot that is more or less flat. I don't recall exactly what the hull looks like at that point.

Here's the area right in front of my engine in the ER, the only pic I have. I'm sorry I don't have better pics atm. It looks to me like the sea strainer/filter for the raw water pickup and a bilge pump are right in front of the motor.

Not a lot of room to locate another device there?
Attached Thumbnails
PXL_20210421_014310550.jpg  
speedcat is offline   Reply With Quote
Old 04-30-2021, 07:50 PM   #16
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,175
Default

If I recall correctly mine is mounted about where your bilge pump is but on the other side.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 04-30-2021, 09:15 PM   #17
Lt. JG
 
Join Date: Apr 2021
Posts: 27
Default

Thanks Mike - I'll check it next time I'm at the boat.

You guys rock!!
__________________

speedcat is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 04:13 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.