Go Back   Maxum Boat Owners Club - Forum > Maxum General > Electronics
Click Here to Login
Register FAQ Community Calendar Today's Posts Log in

Reply
 
Thread Tools Search this Thread Display Modes
 
Old 08-20-2015, 01:54 PM   #1
Lt. JG
 
Join Date: May 2015
Location: Upper Virginia
Posts: 32
Default Adding speakers to 2100SR

My 2001 2100sr(bowrider) only came with two speakers, 1 mounted under the throttle lever and in the same spot on the port side. Anyone have experience adding another set of speakers in the bow or toward the rear of the boat? I can't seem to find a good location to cut a 6.5 inch hole in my perfectly clean boat to add these. Thanks for any info!
__________________

deltaV is offline   Reply With Quote
Old 08-21-2015, 04:12 PM   #2
Moderator

 
shrew's Avatar
 
Join Date: Apr 2008
Posts: 5,603
Default

What is the challenge with finding a location. Length and Width on the surface? Depth on the back-end? Access?

What problem are you trying to fix by adding 2 additional speakers?
__________________

shrew is offline   Reply With Quote
Old 08-21-2015, 09:07 PM   #3
Lt. JG
 
Join Date: May 2015
Location: Upper Virginia
Posts: 32
Default

The only two speakers on the boat are mounted low and on the fabric covered gunwale. The sound does not make it to the bow without cranking it up real loud and causing distortion. The Regal we looked at prior to purchasing this boat had 6 speakers in it and sounded great, it was also 15k more than we got this one for. I was hoping there might be someone with the same or similar boat that has added speakers up front so I can get a better idea of where to put them before I go cutting a huge hole into the fabric and plywood up front( thought this boat didn't have as much wood as it does, prior to purchase).
deltaV is offline   Reply With Quote
Old 08-22-2015, 11:27 AM   #4
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,225
Default

Search in the sport boat section as I have seen folks post on adding speakers. May have been 2 years ago when they posted.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 08-25-2015, 01:36 PM   #5
Moderator

 
shrew's Avatar
 
Join Date: Apr 2008
Posts: 5,603
Default

Is there enough space under the seats up front?
shrew is offline   Reply With Quote
Old 08-25-2015, 03:54 PM   #6
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,225
Default

Funny no sport boat owners have chimed in.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 08-26-2015, 12:10 AM   #7
Lt. JG
 
Join Date: May 2015
Location: Upper Virginia
Posts: 32
Default

I searched, some crazy installs with subs and hundreds of dollars in amps. Not looking to do that. Think I will just live with what I have. I guess there are not a lot of sport boats around anymore. Really appreciate the replys.
deltaV is offline   Reply With Quote
Old 08-26-2015, 03:17 PM   #8
Moderator

 
shrew's Avatar
 
Join Date: Apr 2008
Posts: 5,603
Default

No need to give up. There are still people willing to help. What is the space you're dealing with up front? Any pictures?
shrew is offline   Reply With Quote
Old 08-26-2015, 04:28 PM   #9
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,225
Default

Try this thread for insight.

http://www.maxumownersclub.com/forum...eo-d-4864.html
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 08-26-2015, 09:53 PM   #10
Lt. JG
 
Join Date: May 2015
Location: Upper Virginia
Posts: 32
Default

Mike, I have been looking at that install. In my younger years I would be all for that. I don't know that I could justify that expense to the wife. I do like the install of the front speakers. Shrew, I'm thinking installing down by the feet may be an option, what do you all think about sound quality from having the speakers down that low?
deltaV is offline   Reply With Quote
Old 08-26-2015, 11:29 PM   #11
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,225
Default

Quote:
Originally Posted by deltaV View Post
Mike, I have been looking at that install. In my younger years I would be all for that. I don't know that I could justify that expense to the wife. I do like the install of the front speakers. Shrew, I'm thinking installing down by the feet may be an option, what do you all think about sound quality from having the speakers down that low?

Yea I did not think you wanted to do all that but it gives ideas on where you can install speakers. IMO sound is lost when mounted that low unless you have power behind them.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 08-27-2015, 12:40 PM   #12
Moderator

 
shrew's Avatar
 
Join Date: Apr 2008
Posts: 5,603
Default

Quote:
Originally Posted by deltaV View Post
Shrew, I'm thinking installing down by the feet may be an option, what do you all think about sound quality from having the speakers down that low?
I've only ever seen them in 3 places on a bowrider:

1) Down by the feet mounted flush into the seat.

2) IF there is enough room mounted flush in the bulkhead between the bow space and the consoles.

3) Flush mounted into the sides of the consoles facing each other in the passthrough between the cockpit and the bow seating. Basically just below the split windshield.

I think the sound will be fine wherever you mount them.
shrew is offline   Reply With Quote
Old 08-28-2015, 12:58 AM   #13
Lt. JG
 
Join Date: May 2015
Location: Upper Virginia
Posts: 32
Default

I am changing directions on this for now. Going to mount 6x9s in boxes and put them in the storage under the gunwales. My thought is, if I mount them back far enough, the sound will travel forward better. I am going to make the boxes and carpet them to match the carpet in the boat. Hoping my cheapo 40wx4 Jensen head unit can provide enough power to them. If I don't get what I'm looking for out of that I'll drill some huge holes in the bow area, under the seats. I'm sure the wife will approve of that. HA
deltaV is offline   Reply With Quote
Old 08-28-2015, 01:24 AM   #14
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,225
Default

Post some pictures durning and when done and installed, we love watching others projects.
__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Old 09-23-2015, 06:54 PM   #15
Lt. JG
 
Join Date: May 2015
Location: Upper Virginia
Posts: 32
Default

I went to price the parts for making my own 6x9 speaker boxes, then looked on amazon and found some cheapo boxes for 11 bucks a piece covered with black carpet, which does not match my gray carpet, but i bought them anyway for a trial run, i also bought some cheapo 6x9 Pyle marine speakers and wired it up to the head unit. I put the speaker boxes under the rear jump seats and strapped them down using some extra battery box straps I had laying around. I did not have to drill or cut any holes in my boat which made me happy, The speakers point forward and have provided the increased volume and clarity I was looking for, for a very small investment. Picture of the final attached. There was not much to photograph during the install. The straps are not ideal, but they allowed me to hold them in place without drilling or screwing into anything. They feed back through the access door under either seat and are held in place by the door being closed on the buckle.

deltaV is offline   Reply With Quote
Old 09-23-2015, 11:35 PM   #16
Admiral
 
mmwjr's Avatar
 
Join Date: Feb 2012
Location: Essex, Maryland
Posts: 10,225
Default

Glad you are happy with the results.
__________________

__________________
1997 Silverton 362, 7.4 Crusaders
1997 2400 SCR, 5.7 Vortec / Bravo 2

Mike
mmwjr is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 04:13 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.