Reply
 
Thread Tools Search this Thread Display Modes
 
Old 04-11-2011, 12:04 AM   #1
Lt. Commander
 
Join Date: Apr 2011
Posts: 109
Default 1999 maxum 1900sr gauges?

I am looking for replacements for the existing stock gauges (faria). The tach and speedo are inoperable but the rest are working currently. The speedo is probably in the outdrive and I will check on that. I considered buying just a tach but have been having problems locating one to match, so thought I would check on a whole new set. I am having problems locating some that will fit the existing dash panel. Anybody replaced theirs with new ones have a suggestion. Best I can tell, the part number from faria is TC9456 or TC9326 (that is from there website lookup because the number on the tach is worn off). Great lakes skipper has several oem sets but they are all the wrong size for the tach and speedo. The cutouts on the dash panel appear to be 4" in diameter and the 5 smaller gauges are 1 7/8".
__________________

dsbunton646 is offline   Reply With Quote
Old 04-11-2011, 01:35 AM   #2
Admiral

 
seapuppy's Avatar
 
Join Date: Nov 2005
Location: Everett Wa
Posts: 4,681
Default

do you have a pic' of them???

another place to check is www.fisheriessupply.com

they usually have about everything...

SP
__________________

__________________
Don't compare your life to others. You have no idea what their journey is all about.
------------------------
SSN683 Association member
Par Excellence
------------------------------
2008 Bayliner 340 - "Wild Whim"
--------------------------------------
I live in my own little world....but it's okay-they know me here!!!

Avid practitioner of the martial art: KLIK-PAO.
Tap-Rack-Bang

Anyone that sez "Size doesn't matter" has never owned a boat!
seapuppy is offline   Reply With Quote
Old 04-11-2011, 01:46 AM   #3
Lt. Commander
 
Join Date: Apr 2011
Posts: 109
Default

I can get some pics and put them up in a bit. I pulled the whole dash out tonight and took the tach completely out. It is stated as a "flush mount" and fits in from the backside (as do the rest of them). The bezel sits just even, or maybe a 1/16 or so out of the dash. They are not your typical gauges where you can cut a whole and then slide through the front with a retaining ring on the back. The dash actually has threaded posts on the backside where the mounting rings attach the gauges. I don't want to try and cut the dash holes any bigger for different set because those posts are right in the way. I would rather find a set that is made the same way, or at least compatible with the size holes already in the dash. By the way, who would I even call now to try and get an Maxum oem replacement if that is the route I have to go. I'm sure it would be pricey, probably cost more for the tach than a whole aftermarket set.
dsbunton646 is offline   Reply With Quote
Old 04-11-2011, 02:27 AM   #4
Admiral

 
seapuppy's Avatar
 
Join Date: Nov 2005
Location: Everett Wa
Posts: 4,681
Default

I'll get you the number tomorrow....


Jim at lake union searay here can find them for you.....or find you some gauges.....


SP
__________________
Don't compare your life to others. You have no idea what their journey is all about.
------------------------
SSN683 Association member
Par Excellence
------------------------------
2008 Bayliner 340 - "Wild Whim"
--------------------------------------
I live in my own little world....but it's okay-they know me here!!!

Avid practitioner of the martial art: KLIK-PAO.
Tap-Rack-Bang

Anyone that sez "Size doesn't matter" has never owned a boat!
seapuppy is offline   Reply With Quote
Old 04-11-2011, 03:19 AM   #5
Lt. Commander
 
Join Date: Apr 2011
Posts: 109
Default

I tried to upload some pics but it wouldn't work for some reason. Thanks for the info.
dsbunton646 is offline   Reply With Quote
Old 04-12-2011, 10:53 PM   #6
Lt. Commander
 
Join Date: Apr 2011
Posts: 109
Default

Seapuppy, you can disregard on that number if you were going to get it for me. After contacting a few places and Faria directly, it looks like the only option is to have the tach repaired through Faria. I decided to purchase a whole set from Great lakes that is for a Maxum but is a different size. I will have to cut the dash panel a bit and hopefully won't screw anything up. The whole set was 299.00 shipped (7 gauges with oversized tach and speedo).
dsbunton646 is offline   Reply With Quote
Old 04-23-2011, 10:34 PM   #7
Lt. Commander
 
Join Date: Apr 2011
Posts: 109
Default

Finally got my new gauges in from Great Lakes Skipper. I had to call and complain a little as they didn't send the mounting brackets that were supposed to come with the set. They apologized and two day aired the brackets to me free of charge. While I waited on them and had the dash panel out cutting the new holes I sanded, primed, repainted, and clear coated the dash panel because it was flaking and fading. I couldn't find a direct matching color so I went with a tanish/gold color that looked real close by looking at the cap in the parts store. It looks alright, but dried much lighter than I thought it would be. Went ahead and painted the glove box to match it so it wouldn't look so out of place. all in all, I am happy with it. The gauges look great, and seem to all be working, at least sitting on the trailer in my yard. Best part is, they cost me about the same as just buying the single replacement tach from a dealer. I'll post pics in a bit if I can get them to upload.
dsbunton646 is offline   Reply With Quote
Old 04-24-2011, 12:42 AM   #8
Admiral

 
seapuppy's Avatar
 
Join Date: Nov 2005
Location: Everett Wa
Posts: 4,681
Default

sounds like a good job!!..interesting to see the pic's...

SP
__________________
Don't compare your life to others. You have no idea what their journey is all about.
------------------------
SSN683 Association member
Par Excellence
------------------------------
2008 Bayliner 340 - "Wild Whim"
--------------------------------------
I live in my own little world....but it's okay-they know me here!!!

Avid practitioner of the martial art: KLIK-PAO.
Tap-Rack-Bang

Anyone that sez "Size doesn't matter" has never owned a boat!
seapuppy is offline   Reply With Quote
Old 04-24-2011, 02:08 AM   #9
Lt. Commander
 
Join Date: Apr 2011
Posts: 109
Default







OLD GAUGE--
dsbunton646 is offline   Reply With Quote
Old 04-24-2011, 02:37 AM   #10
Admiral

 
seapuppy's Avatar
 
Join Date: Nov 2005
Location: Everett Wa
Posts: 4,681
Default

NIIIIICE Job!!....




SP
__________________
Don't compare your life to others. You have no idea what their journey is all about.
------------------------
SSN683 Association member
Par Excellence
------------------------------
2008 Bayliner 340 - "Wild Whim"
--------------------------------------
I live in my own little world....but it's okay-they know me here!!!

Avid practitioner of the martial art: KLIK-PAO.
Tap-Rack-Bang

Anyone that sez "Size doesn't matter" has never owned a boat!
seapuppy is offline   Reply With Quote
Old 04-24-2011, 06:21 PM   #11
Lt. Commander
 
Join Date: Apr 2011
Posts: 109
Default

Back where they belong...


dsbunton646 is offline   Reply With Quote
Old 04-24-2011, 07:40 PM   #12
Admiral

 
seapuppy's Avatar
 
Join Date: Nov 2005
Location: Everett Wa
Posts: 4,681
Default

Nive job!!!

thanks for posting!!


SP
__________________

__________________
Don't compare your life to others. You have no idea what their journey is all about.
------------------------
SSN683 Association member
Par Excellence
------------------------------
2008 Bayliner 340 - "Wild Whim"
--------------------------------------
I live in my own little world....but it's okay-they know me here!!!

Avid practitioner of the martial art: KLIK-PAO.
Tap-Rack-Bang

Anyone that sez "Size doesn't matter" has never owned a boat!
seapuppy is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT. The time now is 09:12 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.