Results 1 to 2 of 2

Thread: Alarm Not Working

  1. 11-06-2011, 05:30 PM #1
    secretcajunman
    secretcajunman is offline
    Ensign
    Join Date
    Nov 2011
    Posts
    1

    Default Alarm Not Working

    I have a 1997 Maxum 2300 SR, 454 Carb engine. The alarm that comes on when you turn the key, and if the water temp, oil pressure etc is out of spec, is no longer working. I disconnected the buzzer under the dash, and there is 12 VDC with the buzzer off, only 600 mvDC with the buzzer back on line. I tested the buzzer with a 12 VDC battery, and it was plenty loud. I trace the wires, purple and tan/blue, and all connections at the water temp sensor, drive oil reservoir, and oil pressure look clean. Help!
    Reply With Quote Reply With Quote
  2. 11-06-2011, 08:54 PM #2
    oldno7
    oldno7 is offline
    Lt. Commander oldno7's Avatar
    Join Date
    Mar 2011
    Posts
    139

    Default

    Not to appear simplistic, but is your tether switch activated?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules