Hi William
I removed the a/c out from my 3000scr 1998 it’s a (Marine Air Systems) and it may be the same unit as yours
First turn off the circuit breaker to the a/c and shut the sea cock. when you look at the a/c you should see 2 x black water hoses one is the delivery and the other is the discharge remove then .I used a short pipe and clamped them together to stop any leaking .there should be a drain hose on the spill tray ,pull that off, also remove the ss brackets that hold the tray down you will see a control box in there probable screwed to the side ,When you remove the cover to the control box the wiring schematics are on the inside of the cover and the terminale are marked to indicate what is connected to them . The ones you need to disconnect is the supply cable (tape them up separately), pump cable and the control cable witch looks like a phone line. This cable (control cable) has a plug on it so just unplug it. they are the only cables you need to remove the rest will come out with the a/c unit unscrew the control box so it can come out with the a/c unit .As far as the air duct goes I unscrewed the flange away from the fan motor housing (it’s about 6” square plate with 4 screws. It now should be ready to lift out .You don’t have to worry about any cfc /refrigerant it’s a self contained unit.
I hope this may help you out
Tony




Reply With Quote

Bookmarks