Thin Gelcoat?????

[redcrownline]

I have a 03 3100 that seems to have very, I mean very, thin gel coat in many areas. The starboard side step area, when kneeling to tie up another boat, my knee cracked/indented gelcoat. Around the boarding ladder there was a pin hole in the gel coat, I put my finger against it and now there's a finger tip sized hole. It seems the gelcoat is thin as well as there are honeycomb/ air voids thoughout fiberglass/gelcoat. Anyone else having this issue?

[ed & inge]

yep, me to with my 2009 2400sc3, at the entrance there are big cracks at the gel coat, and at the dashboard part near the door to the cuddy entrance the corner is cracked (there is totally no fiber behind it) 2 cleats at the back loosend up and damaged the gelcoat....and i can see there is a very thin layer of gel coat.....i'll have to go back to my dealer to let it repair....he say's......oww we have to look if it is guarentee......i told him to kiss my a......i have a 5 year hull guarantee...so if he wont repair he has a problem........

well succes with your problem....ed

[redcrownline]

Thx Ed