I bought it!

[BillinPA]

I did it, I bought the 92 2300SCR. As expected, I need to replace the prop. It is a 1992 5.7L mercruiser with the Alpha 1 (230HP). Does anyone know what the correct prop is and where to get it? I would hate to have to use trial and error to find a prop.

BillinPA

[seapuppy]

when I had my bayliner with the 5.0l A1G2 drive...I had a 15x19x3 bladed bigeared prop...got the best results from that one...the other prop I had was a (if my memory serves me right :shock: )...15x21x4 bladed prop...that was good for the hi end or WOT....take your old prop off and look on the sides of the barrel between the blades...try and see what the dia. and pitch is...then take it to a local prop shop and buy one there...michigan wheel.com also has some props that might fit....but a merk prop is only about 125 bucks.....should use that one....
also you need to try a prop and go out and check the WOT range...your boat should operate at 4200-4800rpm according to your manual......